> > Robert Leclercq wrote:
     > > >
     > > > Paul
     > > > Do you have the dimensions for the Hatch 4 bolt exhaust

flange modification?

     > > Stud size, hole pattern, and thread depth?
     > > > regards, Robert
     > >
     > > You are on your own. I have no drawings. I got pictures some

place.

     > > I'll dig them up. Here is one.
     > >
     > > Paul Lamar
     >
     > Paul and Robert,
     >
     > If I remember correctly Richard Sohn made a jig utilizing the

stock exhaust

     >
     > studs to position the jig to modify his one rotor engine to the

"Hatch Type" four

     >
     > bolt exhaust flange .
     >
     >
     >
     > Kelly Troyer

Robert Leclercq wrote:

Paul & George
Is the Hatch 4 bolt flange deemed strong enough to support the weight of

a turbo? Or is it only appropriate for NA use?

regards, Robert

I think you would be pushing it.

Paul Lamar

Robert,
I'm with Paul, I wouldn't hang a Turbo off it.
George (down under)

 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.