Subject: Not list-related - Airboat ducts
From: ACRE
Date: 11/23/2004, 7:43 AM


     > That was an interesting picture - since it was a submarine, the purpose
     > may  very well have been noise. A tip shroud rotating can be handled
     > quite nicely with current marerials. On an early ducted fan at GE
     > we used a segmented tip shroud of titanium as a part of the labrynth
     > sealing of the stage. It did not use hoop, but was completely carried
     > by a pin and clevis configuration at the tip of the 17-4ph blades.
     > Carbon fiber in hoop can support a rather high centrifugal load.
     > Vance

Carbon would indeed make this possible. I also thought of a flat thin tip
ring burried in the standard duct. with a unidirectional fiber this could be
about .04 thick with incredible strength. In this use it would help keep
the tip spacing and angle perfect.
Bill Jepson

The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.