With the right tool and the right material you can make these in five
minutes.

The cutting tool is available from Airgas.
1/4 inch radius. Tube is 1/2 inch thick wall 3 inch OD aluminum.

This can be welded into the 3.25 by 4 inch plenum or screwed in from

the

back side.

Paul Lamar

Ed Klepeis wrote:

Dear Paul
      When Jerry was down at my shop I showed him the bell mouths for

the

low profile subaru intake manifolds I make up they can be used on any

2''o.d

tube. If need be they can be made larger or smaller. Let me know your

needs.

           Regards
         Ed
     techwelding@comcast.net

How much are they Ed?

Paul Lamar

Ed,
Got any pictures - do they have a mounting flange of any kind.

>From the looks of things, this nay be something else I will have to make
locally - I just can't believe the prices they are charging for these things
in Australia. It seems their all imported!
George (down under)

 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.