Subject: Propeller Article in Contact magazine (Issue #77)
From: ACRE
Date: 11/26/2004, 10:51 AM

Del Johnson wrote:

There is an excellent article on Propeller design, by Paul Lipps,  in the
last issue of Contact magazine.  He prop designs vary the pitch according to
the effective airflow across the propeller at different radius locations
from the center.  This, of course, varies with airspeed and prop rpm.  Near
the center of the prop, at cruise speed,   the airflow is more predominate
from the airstream resulting the airplane moving  through the atmosphere
then it is from the rotational velocity of the prop.  This results in
designing more pitch into the props root section which also improves cooling
airflow into the inlets that are located on either side of the spinner.
Paul's Lancair, which is equipped with a 0-235 135 hp engine, is overcooled
with 1.5 x 4 inch inlets(2).  His first prop, which was designed as a mild
racing prop, achieved 2000 ft/min climb rates and 240 mph at 3150 rpm with a
pead cruise efficiency of 90%.  The a 12 to 27% improvement over other, more
conventional props, that had been tested on the same aircraft.

Individual issues of Contact Magazine can be purchase.  Go to
http://www.contactmagazine.com/ if interested.

As a result of reading the article I am interested in reading more about
prop designs.  The book "Modern propeller and Duct Design", by Hollman and
Bettosini was mentioned in the article.  If anyone has a used copy of this
book and would want to sell it, let me know.

Del Johnson


The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.