DaveLeonard wrote:

I am trying to avoid trying to make one just because it is such

a hassle.  I

don't trust all those shiny ones you see made out of polished

305.  I would

go with your 321 tube idea if I do make one.  I have been

looking on e-bay

for the last month but have not found the manifold I am looking

for.  I will

try the parts trader.

I love the one in the picture from GURU.  It will be more likely to work
than eve  I found their web site but the manifold is not

listed.  I will try

to give them a call.

Thanks for the help.

Dave Leonard

DaveLeonard wrote:

Hi all,  I am in need of a cast iron HKS exhaust manifold to

complete my

TO4
installation.  I need the internal waste-gate type, but

HKS is out of

stock
and does not plan any runs in the near future.  Does anyone

have one they

are willing to sell?  Ernesto?  Don't you have one

sitting around?

Dave Leonard

Ernesto Sanchez wrote:

Sorry none for sale.  I have two HKS manifolds: One with a race

gate and the

other has no provision for a waste gate.  I'm going to use the

one without a

gate.  Try searching ebay or "The Parts Trader" on the web for

a manifold.

Another way is to make one out of  a RB flange, TO-4 flange and

some square

tubing.  I mocked one up and came up with a very compact design.
Ernesto

Also Dave I saw this Aussie T04 manifold at Seven Stock by

Guru racing.

First pic.

Second & third pics are local Rotech Nelson Wang TO4 tube manifolds.

Paul Lamar

DaveLeonard wrote:

I am trying to avoid trying to make one just because it is such

a hassle.  I

don't trust all those shiny ones you see made out of polished

305.  I would

go with your 321 tube idea if I do make one.  I have been

looking on e-bay

for the last month but have not found the manifold I am looking

for.  I will

try the parts trader.

I love the one in the picture from GURU.  It will be more likely to work
than eve  I found their web site but the manifold is not

listed.  I will try

to give them a call.

Thanks for the help.

Dave Leonard

Jap Performance in Sydney also has a nice custom cast iron TO4 manifold.
http://www.japperformance.com/contacts.html
Saw it when I was over there.

Paul Lamar

That looks like a good one too, but you have it reversed in the picture.
Flip it over.  It moves the turbo pretty far 'forward' (in the car).  Still,
it may work.

Dave Leonard

It looks like it can be flipped with perhaps a little grinding work.

Cheap as I recall when the Aussi dollar was 50 cents US.

Paul Lamar

The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.