Del Johnson wrote:
There is an excellent article on Propeller design, by Paul Lipps, in
the
last issue of Contact magazine. He prop designs vary the pitch
according to
the effective airflow across the propeller at different radius
locations
from the center. This, of course, varies with airspeed and prop rpm.
Near
the center of the prop, at cruise speed, the airflow is more
predominate
from the airstream resulting the airplane moving through the
atmosphere
then it is from the rotational velocity of the prop. This results in
designing more pitch into the props root section which also improves
cooling
airflow into the inlets that are located on either side of the
spinner.
Paul's Lancair, which is equipped with a 0-235 135 hp engine, is
overcooled
with 1.5 x 4 inch inlets(2). His first prop, which was designed as a
mild
racing prop, achieved 2000 ft/min climb rates and 240 mph at 3150 rpm
with a
pead cruise efficiency of 90%. The a 12 to 27% improvement over
other, more
conventional props, that had been tested on the same aircraft.
Individual issues of Contact Magazine can be purchase. Go to
http://www.contactmagazine.com/ if interested.
As a result of reading the article I am interested in reading more
about
prop designs. The book "Modern propeller and Duct Design", by
Hollman and
Bettosini was mentioned in the article. If anyone has a used copy of
this
book and would want to sell it, let me know.
Del Johnson
Marc de Piolenc wrote:
I have a copy of Hollman's book, but I don't want to part with it. I
can furnish a photocopy if nothing better turns up for you online.
Marc
Thanks for the offer. I can purchase the book new from Aircraft Spruce for
$59 but I thought that I would look for a used version first. I might also
check at the Engineering Library MSU
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.