Just like a said three or four years ago on here.
This thing is a nasty joke. It started out at 15 GPM
and zero back pressure and it was all down hill from there. 
That is the bottom reading on the flow meter.
It started cavitating at 6 psi back pressure with no discernible 
flow on the flow meter. Off scale on the bottom of the
flow meter. You could hear and feel it rattle. I could not 
believe what I was seeing and I had Kluse come over and verify 
what was happening and see if I was doing something wrong.
We bleed the flow meter and the pump. Same thing.
 
Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.