"Powell, Ken" wrote:

Snip...

Jerry,
Have you bought a spinner yet? I'm planning on a 16" spinner also,

maybe

from a mustang II, and was wondering about the price. Your radiator

has

the same dimensions and looks like your inlet duct is

similar to what I'm planning.

Brian Trubee

Brian, count me 'in' on a group buy if you go that route for a 16"
spinner.
Thanks, Ken Powell

Ok, I'll run it by Brian Alley. The more the  merrier.
Brian Trubee

I got the following from Brian Alley.  I did tell him that Brian
Trubee would be the contact for the group buy hence forth.    Jerry

"
Jerry, I would need to know the shape, length and any
other info you can provide. The material difference
would be the only increase in cost over the 12"
spinner and back plate I already make. The Tailwind
spinner is $185 and $15 to box and ship. I would think
a 16" spinner and back plate would be $225 or less. I
use 4 layers of carbon in the spinner and 5 layers in
the back plate. With the increased diameter it may be
necessary to use 5 layers in the 16" spinner and 6-7
in the back plate. Also, a usable form or plug that I
could pull a mold from would be very helpful.

 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.