Bulent Aliev wrote:

Hi Paul, here are three photos of my almost finished installation. I

still

need few details taken care of before making some noise. The radiator is

on

a weird angle for a reason. The P-51 scoop blows the air into a wedge

formed

by the cowling wall and the rad. The exit is unobstructed by the oil pan

and

the hot oil pan does not radiate directly back in to the radiator. All

the

water tubes are 1.5" aluminum with beaded ends, silicone hose joints

with

Breeze clamps.
Since I already had the turbo rebuilt, I installed it and relieved the

waste

gate so it opens about 100% more? I'll wait and see which turbo will be

the

better choice, T4 or Australian mod?
The intake manifold is almost finished, The computer and EM-2 installed

and

wired up.
I already know about the engine mount, so don't waste your breath:)
I like it!

--
Bulent Aliev
Stretched CZ MK-IV W/Turbo Rotary
Ft Lauderdale, FL FXE
http://home.bellsouth.net/p/PWP-MyPlane

I only got these two. Do you have another?

What does that intake manifold do?

Paul Lamar

Bulent,

    Could you provide some details about the bell housing please ? Is that
Tracy's PRSU ?  Any mods ?

Thanks John

The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.