George Lendich wrote:

Paul,
I'm wanting to get the exhaust away from  the side of the engine and I've decided on a 2 into one and put my muffler longways across the back of the engine.

I like the muffler Jerry is doing but need to modify it to suite my own application and have come up with a variation which puts exhaust into one side and cold air into the other ( cold air outside)
- with swirl vanes and a flat fishtail exhaust which exits the bottom louver.

I've made the cold air only 2" as I don't want to put too much back pressure on the exhaust side - I guess only testing will tell if it works or not.

All comments welcome.

George (down under)

The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.