Subject: Mustang II spinner, was Re: Rad plenum and cowl design
From: ACRE
Date: 11/29/2004, 5:49 PM


...snipped
No,  I have not bought the spinner yet.  I think the Mustang 2 spinner
will be quite expensive.  If we could get a few guys together, we might
be able to get Brian Alley to build us some CF spinners.  His work is
beautiful.    I have not talked to him about this and have no idea if
he would do it or the price.   Jerry


# 14" Hartzell spinner A-2297-P (polished + drilled), $795 incl. UPS

# 16" Mustang Aluminium spinner w. drilled backplate + fwd bulkhead,
   specify prop hub thickness + engine, fwd bulkhead sizes 2-3/4", 3-3/4",
4-3/8" thick hub, $345.- (+$75.- for rough polish)

# Spacer for spinner front bulkhead (1/8" thick + drilled), $8.75

# Prop extension for fixed pitch wood prop 7" dia, $350.- +12.- UPS
# Prop crushplate 6" or 7" x 3/8", $ 51.50 + 6.- shipping, free with
extension

Fresh from the online list of Mustang Aeronautics Inc.,
http://www.mustangaero.com/images/Mustang%20II/M2Pr-Sept03.pdf

Thomas Jakits :))

Is 345.- considered pricey or not?
...serious question, I have no experience with these...


The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.