> Zero Manufacturing has a wide range of these things with bolts holding
     > down the lids as close as one inch apart to take considerable pressure.
     >
     >
     > Paul Lamar
     >
           Do they have a website Paul ?



      Kelly Troyer

I think they must but I don't know what it is because my catalog is rather old.
Phone number is (801) 298 5900 or (413) 267 5561

It is Zero corporation and not Zero Manufacturing.

Jerry, here are some 3D's using an all in one alternate air flapper valve and a Zero
box. 4 by 10.5 by 4 inches high. Part number Z64-168A in 6061-O or
part number ZT64-168B in 3003-O. You can get different style lids with gaskets
for the bottom. This assumes you are using the up and over manifold.

We might need a group buy on these.
 
Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.