Jerry Hey wrote:

The two drawings Russ-final-TV-2D and Russ-final2-TV-2D appear to have
different lengths coming out of the engine.  Also, Russ2-18-inch-TV-3D
is different from the final2.  Concerning the rear runner,  how would
the 20 degree turn down be accomplished?   Thanks,  Jerry

I'll check everything later today. Just do the 18 inch version which
is closest to the engine. The 20 degree bend is cut down from a 45 or
a 90. You can probably do it by setting your friction blade chop saw
to the right angle.
 
Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.