> This is a breakthrough in intake manifolds. we have been fighting over the
     > top for years. All made possible by the P-port. This will probably even
     > fit in a Lancair 360.
     >
     > Thanks Russell.
     >
     > Paul Lamar
     >
       Paul,

Kelly Troyer wrote:

         Can you put a 13B with the in front of the "Delta" firewall with the

     Russell 18 inch manifold in place.....You do not need to add a engine

     mount to the rendering........The cowl fairs into a 16 inch spinner from

     the firewall........The only openings will a shark mouth under spinner

     for oil cooler and for intake ram air.........Is it feasable to have the ram

     air opening incorporated into the shark mouth but separate internally?

       Attached are firewall numbers,etc.......The thrust line is the center of

     the firewall........Sorry for crude drawings .

Looks like it will fit fine with a mod or two to the cowl.
Can you move the starter over to the other side by drilling out the
Ross bell housing?

Have you thought about renting out that spinner so someone can make a composite mold
out of it? :)

BTW Bob White what is the status of that dyke Delta flying in Los Cruces NM?

BTW the Newsletter will be shut down tonight for a bout a week.
Don't send messages as they will fill my earthlink mail box and they maybe
lost forever.

Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.