Subject: Larry La Beau Dyke Delta
From: ACRE
Date: 12/9/2004, 9:16 PM


BTW Bob White what is the status of that dyke Delta flying in Los
Cruces NM?


Paul Lamar


Hi Paul,

I see you are back on line, so here is my report from Larry La Beau.

I had been unable to get in touch with Larry, and handn't tried for a
couple of months.  I talked to him Monday (12/6) and got an update.

He has about 46 hours on the plane now.  Cooling is OK, climb water max
of 200F, oil 190F but with cool OAT of around 60F so we'll see how he
does next summer.  He is using 4 - 8 X 11 coolers he bought at a speed
shop in Las Cruces for water cooling.  Two on each side mounted back to
back in a simulation of a cross flow radiator.  The coolers on each
side are in series, and the sides are plumbed in parallel.  19 sq. in.
openings on each side with bell shaped difusers feeding them.  Stock
Mazda oil cooler mounted across the front of his cowling with around
20-24 sq. in. opening.  He said he was also running 100% glycol to get a
higher boiling point but was going to switch to a 50/50 glycol mix. That
can't be doing his cooling much good. He has changed his configuration
since I saw the plane.

His wrapped exhaust is gone.  He's now using a manifold made from a
turbo housing.  Has a new long block on order from Bruce T.  He thinks
he's only making about 130 HP with his present engine.  He replaced his
Ivo prop with a Warp Drive and it's running smoother and quieter.

I'll go down and check it out as soon as I can fly instead of drive. :)

Bob White

--
http://www.bob-white.com
N93BD - Rotary Powered BD-4 (soon)

The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.