One of the advantages of the Russell is it is a simple direct
straight shot in from
the ram air scoop to the plenum with no 90 degree turns required. In
other
words the openings of the tuned pipe are in line with the overall
direction
of air flow. There is absolutely no doubt where the injected fuel will
go.
There is also no doubt whatsoever as to the HP generated as it is
merely a rearrangement and not a redesign of the Lemans engine P-port
intake system.
Paul Lamar
As far as runner size is concerned it does not matter whether we are
talking about an over the top system or the Russell. I asked Rolf
about an over the top system, so that is where he directed his
comments. The problem of how to even get over the top given the
shortness of the tuned intake, led to the solutions he suggested.
But continuing problems with the over the top design (injector angle
the latest) make it unlikely to ever be built. Jerry
If is not only that Jerry it is a question of runner area. If you go over the
required runner area I.E. 2 inch dia. it will not clear the cowl unless you
tilt it back and modify the water pump. That seems to be the easiest thing
to do. If you don't use the 2 inch 3 CL there is no point in the P-port in the first
place. You might as well use use the side port and four 1.5 inch 2.5 CL pipes.
Here is another layout along those lines.
I will tell you what I will do to get you started. You send me a pump housing
and I will cut it down for you to use as an example. That way you or Ed
can tig weld it back together as a service for other people that have a low
overhead cowling like the Tailwind, Lancair 360, Vision, etc..
A further advantage of modifying the pump is you can point the out let where
you need it to point.
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.