Subject: Another approach to the tuned intake
From: ACRE
Date: 12/11/2004, 7:47 PM


cut
I am not sure how you get the 310 cuft per minute. We know that 1.3 Liter / 2.6 Liter engine is
equal to ~40 cubic inches per chamber.
40 cubic inches / 1728 * 6000 rpm = 139 cubic feet per minute per rotor, or 278 cfm for two rotors,
which is not too far off from your number of 310 cfm.


This is how I got it.

Paul Lamar


Paul,
that is a good chart.
It is hardly worth talking about but it shows volumes at 80 % volumetric efficiency and the chart
coincides with my number of 278 *.80 = 222 cfm at the intersection of the 6000 rpm and 160 cubic inches
lines.
(I suppose by oversight you picked the 7000 rpm line.)

Rolf

7000 RPM is the RPM of choice for a 2.85:1 PSRU. Tracy is getting 7400 RPM top
speed at 217 MPH. The RX8 engine generates peak power at 8500 RPM.

I also corrected the data to 100% Vol. Eff.  as a guess. Actually it should be higher than
that as P Ports are typically 120%. That would change my CFM number to 370 CFM
and increase all the runner velocities as as well. It is the fundamental reason the
Wankel can generate so much HP for such a small displacement. No intake
valves to get in the way.

Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.