Kelly Troyer wrote:
In this design there is more flexibility as a one inch change in the lateral
position of the 180 bends results in a 2 inch change in the pipe length.
In other words unlike the Russell it has more flexibility of design.
There is also room to move the plenum closer to the engine and the 180 bend
further out towards the cowl. If you are worried about fuel spills you
could enclose the injectors in their own sealed box with a fuel drain.
Paul Lamar
Paul,
Now this is very interesting.......I have plenty of room to the side of my
cowl........Can you put these views of Jerry's engine on the Dyke Delta firewall
with 4.550 inches added to the redrive and the prop flange/spinner 44 inches
from the firewall ? No engine mount is needed and fair cowl from firewall
directly to the 16 inch spinner........If necessary the intake can be flattened
more toward the firewall .
Thanks
Kelly Troyer
Yep. Pieces of cake.
Paul Lamar
Here it is.
I'll have to try the Russell now that I know about the gear box extension.
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.