Jerry Hey wrote:
Three concepts in intake design have come together give the over the
top, cool side p port intake new life, at least to my mind.
1) The snorkel ram intake that Paul has featured in many of his
recent drawings. Bringing air into the plenum previously required a
lot of ductwork and blocked access to things like the dip stick. The
snorkel is direct and efficient. I have gone from not liking the
snorkel to loving it.
2) The use of tight radius bends to really get the intake low over the
engine. If these have to be custom castings, so be it. It is just a
180º. If for some reason these are not practical to cast, then they
can be made from carbon fiber. Others have already made CF intakes.
It is time to free ourselves from off the shelf stuff that does not
fit. The tight bends combined with the snorkel give us the
opportunity to make a much shorter intake that can be easily be tuned
to the proper (18" to 22") length.
3) Because of the snorkel and the tight radius runners, the plenum can
be placed over the center of the engine, under the high center of the
cowl in the one place there is a little room to work with.
Jerry
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.