Subject: Long EZ Quasi stright man]
From: ACRE
Date: 12/21/2004, 2:50 PM


OK here it is.

How many are interested in p-ports?

Where do you want to put your muffler?

Paul Lamar

Joseph M Berki wrote:

Paul,
         For this version, The intake scoop and plenum could be
incorporated into a scoop / duct that is located under the spar.  I am not
sure about a standard Long, but I think it might work on the Limo.  I will
know more when I get the AC turned back up and determine where the
engine is.

Joe Berki
Limo EZ
Shop is too cold

The big problem with straight out to the side is it makes the runners too
long.
Depending on where the muffler is. So far Perry is using just a stock cast
iron manifold
for a muffler and it is very compact.

See anything wrong with these dimensions Joe? Anybody?

Paul Lamar

Joseph M Berki wrote:

Paul,
         How long are the runners?  How much travel is required in the
runners? I think my engine is further back.  I will check to see how
far.  Reason is because the pilot went forward with the stretch.

Joe


Shortest length is down around 20 inches. I have yet to
calculate it exactly. Not promising with a muffler to contend with.

Paul Lamar

The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.