The 2:17 drive is a higher ratio than they use. My intake will be
shorter. There will be ram air. These advantages will add up to more
hp.
HP will scale with the drive ratios no doubt that. I think 240 hp
at 7500 rpm is well within reach with the present system. But it
is all talk until engine #1 is running.
It is nine degrees in the shop this morning. All the space heater
does is make noise. California Dreaming. Jerry
Jerry, The Powersport reduction is around 2.4 : 1. I have spoken to
Steven Wienzerl who designed the new drive. He is designing a new
drive for higher outputs and 3 rotor use. He is free to do engines >200
HP in his contract with Powersport. He has been working on the new
reduction and has it all designed, but like many of us has a "day job"
and progress is slow. More than that I'm just guessing. BTW Weinzerl
was the one who told me the max output of the stock mazda water
pump was about 52-54 gpm just prior to cavitation. This is the number
Paul was able to verify on his water pump rig. More flow than that will
require an aftermarket pump and between 3-5 HP to drive it.
At my house in the Sierra foothills it's about 52 degrees Jerry but the
shop feels much colder! Hang in there.
Bill Jepson
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.