Subject: Has Moller finally shipped a product?
From: ACRE
Date: 12/25/2004, 3:00 AM

Christmas present for ultra light rotor heads?

Will the aluminum end and rotor housing coatings hold up under 
heavy duty use and high volume manufacturing? 

If not it is going to be one hell of a crash killing 
a lot of people financially.

Paul Lamar

39.5 HP engine
5 Yr Limited Warranty
 Rotary type 400cc design
 Light

Dimensions
Length: 90"
Width: 28"
Tail Width: 24"
Weight: 170lbs
Shipping Weight: 177 lbs
Max Speed: 45mph
with 225lbs passenger weight
Fuel Capacity: 2 gallons
 Run Time: 2hrs per tank of gas

Aqua Xtremes, Inc
1005 Terminal Way
Suite 110
Reno, NV 89502
775.324.8531
info@aquaxtremes.com

Pat Stimpson
Aqua Xtremes, Inc.
509 879-9681
www.AquaXtremes.com or call (775) 324-8531.

###################################################################
Freedom Motors Signs Contract to Develop Small Rotapower Engine

Davis, California, September 10, 2004 Freedom Motors
(www.Freedom-Motors.com) has signed a contract with a multi-billion dollar
company to develop rotary engines using its licensed Rotapower® engine
technology.  The contracting company expects to sell over 10 million engines
per year.  Freedom Motors will receive a royalty per engine and be paid
engineering services to develop the initial prototype engines. The license
granted under this contract includes exclusive rights during the first 10
years and non-exclusive rights thereafter.  Freedom Motors will also have an
opportunity to purchase engines for use in all applications not covered
under this contract.

This is a major milestone for the rotary engine as it has the potential to
become the largest implementation of rotary engine technology to date, even
surpassing the millions of engines produced by Mazda? said Jim Toreson,
Freedom Motor?s CEO.  He went on to say, ?Freedom Motors is recognized today
for its leadership in the design of new rotary engines and is now working
with multiple manufacturing firms with the expertise to bring the rotary
into a wide variety of applications.?

Freedom Motors has licensed the Rotapower® engine technology from Moller
International (Pink Sheets: MLER), the developer of the M400 Skycar?
aircraft.  The engines were originally developed for use in Moller?s unique
vertical takeoff and landing (VTOL) aircraft, but have been licensed to
Freedom Motors for manufacturing and distribution for all other non-aviation
related applications.  Under its license agreement with Moller
International, Freedom Motors is required to pass through 15% of any
sub-license royalties to Moller International. Rotapower® is the trademark
of Moller International (www.moller.com) in the USA and other countries.

The rotary engine is the perfect engine for a great number of high-density
power applications where life-cycle cost is a concern? said Paul Moller,
President of Moller International.  ?Our application in the Skycar? is
weight and performance critical, just as it is in many other uses.  Small
size, fuel flexibility, ultra-low hazardous emissions and overall durability
are other key advantages the Rotapower® engine has over most other choices?
he concluded.

For further information on the Freedom Motors line of RotapowerÒ engines,
contact Bruce Calkins by mail to Freedom Motors of 1222 Research Park Drive,
Davis, CA  95616, by phone at (530) 756-1230 ext. 33, e-mail to
sales@freedom-motors.com or point your browser at www.Freedom-Motors.com. 


 Here are just three of many old messages on the Moller subject over the years.
**********************************************************************
Subject:        Freedom motors
   Date:         Fri, 12 Feb 1999 21:39:55 -0800
   From:         Paul <rotaryeng@earthlink.net>
     

Thought you would like to take a look at the Freedom Motors web site.  This
company is associated with the Moller skycar that uses four rotary engines.
Interesting info on ducted fan engines.

http://www.freedom-motors.com

Mike Perry


We got a guy on here that worked for Moller as a project engineer
on the Moller rotary engine. I can't wait to here what Jeff says
about this :-)

Paul Lamar


Not much.  If Paul Moller had made a decent attempt to market the engine to
jet ski's five years ago I might still be working there.

Jeff Spitzer

 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org

******************************************************************************

Subject:         moller skycar m400
   Date:         Fri, 19 Jul 2002 11:19:56 -0700
   From:         ACRE NL <rotaryeng@earthlink.net>




http://www.moller.com/skycar/m400/

Looking at these numbers the average lay person would say no
way. Are the engines turbo charged to allow 29,000 feet?
Not necessarily. I don't have the lapse rate at my finger tips
but if you start with 650 HP you might have enough power left over
at
29,000 feet to go 345 MPH. No matter it really does not make
any difference.

Cruise... 345 mph
Range.... 900 miles
Fuel..... 28 mpg
Alitude.. 29,000 feet
Gross.... 2400 pounds
Max Power 645 hp

Let us say he got the BSFC down to .4 on all four engines.
A very good number for rotaries.
This trip will take 2.6 hours. 28 MPG is 32 gallons
of fuel. 32 gallons is about 193 pounds of fuel.
193 divided by 2.6 hours is 74 pounds per hour total for all
four engines. At a BSFC of .4 that is 185 total cruise HP
for 345 MPH at 29,000 feet for a four passenger airplane.
Not bloody likely!! Particularly with low efficiency ducted fans.
See the chart below.

Did I do the numbers right?

With friends like Paul Moller the rotary does not need any
enemies.

Paul Lamar


Paul Lamar apparently sees himself as knowledgeable of aircraft
performance.
As such he should know that maximum mileage or range or L/D does not
occur
at maximum speed.  Since when does your car get its maximum mileage
at its
maximum speed?

What we have published and stand by is that the Skycar gets its
maximum
mileage at 215 MPH at 29,000 feet or at 140 MPH at sea level.  A
specific
fuel consumption of .4 pounds per horsepower-hour can only be
achieved at
altitude by turbo-charging some of the Skycar's engines.

Since I have a hard time believing Mr. Lamar could really possess
such
faulty reasoning I have to assume he purposely chose to mislead his
readers.

Paul Moller


Hey I am just going with what is on your web site Paul.
It says cruise "345 MPH"

Here is a capture of your page.

I'll rerun the numbers for 215 MPH.

215 MPH 900 miles 4.18 hours. 28 mpg 32 gallons 193 pounds of fuel.
Total. 46 pounds of fuel per hour. .4 BSFC  115 HP! Equally
unlikely.


A turbo will not change the BSFC by much. In fact it might increase
it some what. Lets say the BSFC is .45 then the HP comes out
at 102 HP for 215 MPH equally unlikely.

Most of the guys on here are struggling to get 200 MPH on 160 to 180
HP with a high efficiency prop. It is a rare airplane that
will go 200 MPH on 100 HP.

If indeed cruise  is only  140 MPH the numbers are
900 miles. 6.42 hours. 28 MPG. 193 pounds of fuel. 30 pounds per hour.
0.4 BSFC... 75 HP! Possible. I know of nobody flying a 345 MPH
airplane
that cruises it at 140 MPH. Kind of weird.

I think it is you Paul that are trying to mislead people.
You can clear it up by stating on your web site at what cruise speed
you are getting 28 MPG.

Paul Lamar


Who cares about mpg. It looks cool!

Actually, 160 HP RV's at altitude are probably not producing more than
100 HP
(65%) and yet approaching 200 mph. Still, the "345 mph cruise" and "28
mpg" could
easily make one assume it's 28 mpg at cruise (e.g. 345 mph).

Finn


After thinking about it a bit and considering its "wing area" or lack
thereof I kind of doubt it could maintain level flight  at 140 mph without
some down thrust from the ducted fans. That takes additional HP. That
would severely cut into the "28 mpg".

According to this chart from Kuchemann & Weber ducted fans are only 60%
efficient compared to 80% for a good prop. That means you would
get 128 net HP out of the 160 HP engine with a prop but only
96 net HP out of the 160 HP engine with a ducted fan.
In other words to achieve what an RV achieves with 160 HP engine
the Moller Skycar engine would need 213 HP.

Don't get me wrong about all this. I like the idea of the SkyCar
and I have defended Paul Moller in the past as Perry Mick will tell
you and you would find out if you read some of the real old messages
on the CD.


I am getting a bit tired of waiting however for a first flight.
A tethered flight does not count. I see no reason why the control system
could not be achieved with the computer technology we had ten years ago.
Unless of course there is something seriously wrong somewhere that I
don't know about. Perhaps the engines are not generating the HP claimed.
Perhaps the real time computer control system design is beyond Paul
Moller.
Perhaps the duct efficiency is worse than I think it is. What in hell is
holding them up? Why isn't the military falling all over themselves
lining up to buy SkyCars? What do they know that we don't know?

The other thing that is bothering me about this Freedom Motors subsidiary
operation is we were promised Moller rotary engines in production back in
the first quarter of 2001. It is now the second quarter of 2002 and no
sign of any engines at all anywhere for any purpose. Who is getting
the engines if anyone? Where can I go to see any Moller engine run?

Paul Lamar


Well with vapor ware I guess you can make any claims you want since you
will never have to prove them. This thing has been on the cover of Pop
Science
and Pop Mech about a dozen times, and one time is the kiss of death,
I am just thankful that he is not using my money (and I intend to keep
it that way) Vance

************************************************************************
Subject:             Freedom motor announcement?
       Date:             Tue, 06 May 2003 09:30:52 -0700
       From:             ACRE <rotaryeng@earthlink.net>




 > >>>>>>>> Paul
 >>>>>>>>
 >>>>>>>> I just checked up on the Moeller site and see where Freedom
 >> Motors
 >>> is
 >>>>>>>> taking orders for their
 >>>>>>>> engines.
 >>>>>>>>
 >>>>>>>> "Beta versions of the Rotapower® 650 and 1300 will be available
 >>> this
 >>>>>>>> summer and priced at $5,000
 >>>>>>>> and $7,000, respectively. Volume pricing reductions will be
 >>> announced
 >>>>>>>> as production levels
 >>>>>>>> increase later this year. "
 >>>>>>>>
 >>>>>>>> www.freedom-motors.com/
 >>>>>>>>
 >>>>>>>> Thought I would pass this along to the group.
 >>>>>>>>
 >>>>>>>> Mike Perry


 >>>>>>> What ever you do don't send them any money.
 >>
 >>>>>> They have had the same message up for 3+ years.  Paul Moller
 >> recently
 >>>>>> plead guilty to stock violations.
 >>>>>>
 >>>>>> Hans Conser


 >>>> "Bruce E. Calkins" wrote:
 >>>>>
 >>>>> The Rotapower 650 announcement went up a few days ago. If you will
 >>> notice,
 >>>>> Freedom Motors had planned to put the 530cc engine into production
 >>> first,
 >>>>> but because of the interest received in the larger
 >>> displacement/horsepower
 >>>>> output engine the 650cc is being produced first.
 >>>>>
 >>>>> Also, Dr. Moller did not "plead guilty" to anything.  Rather than
 >>>>> go
 >>> into a
 >>>>> long battle with the SEC, he agreed to pay a fine.
 >>>>>
 >>>>> -MI


 >>>> I'll believe after I see it run for 500 hours Bruce. Its going to
 >>>> take
 >> you
 >>>> years to overcome your image. Best change your company name and hide
 >>>> the owner ship of the new company.
 >>>>
 >>>> Paul Lamar


 >> wadebush wrote:
 >>>
 >>> Bruce,
 >>> Instead of being defensive about the engine why not put one of your
 >>> 650cc
 >>> engine in an airplane and fly it around to all the shows
 >>> demonstrating
 >> that
 >>> it works. Better yet, one of each.
 >>> After some real air time hours, people not wanting to "roll their
 >>> own" can
 >>> go "drop in" for their aircraft engines through you guys (Moeller /
 >> Freedom
 >>> Motors).
 >>> Until then the only "proven" (real air time rotaries) are the ones
 >>> that
 >>> actually fly and are able to make it to the shows.
 >>
 >>> Paul has to be somewhat conservative especially on anything not
 >>> flown. To
 >>> tell
 >>> everyone "yes, go and buy one" would put him at odds with potential
 >> lawsuits
 >>> and mad patrons should some unforeseen problem arise in the Freedom
 >>> motor.
 >>> The engine is different enough thats its reliability is yet unproven
 >>> especially without a flying example. Of course people would be
 >>> interested
 >>> but there will always be those that choose to pioneer their own way
 >>> or, as
 >>> in my case, save tons of money while learning a subject extremely
 >>> interesting to me.
 >>> Just my take on this, but I could be wrong.
 >>>
 >>> Wade Bush


 > "Bruce E. Calkins" wrote:
 >>
 >> Dear Wade,
 >>
 >> We have been working with a group which intends to offer the engine
 >> to the
 >> aviation community and they, in turn, have been talking with a
 >> aircraft
 >> builder.  My understanding is that they will be getting one of the
 >> first 50
 >> engines that come out of our partner's facility in Minnesota and that
 >> it
 >> will be modified and used in some sort of aircraft application.  I
 >> have not
 >> been part of that discussion.  We are concentrating on the engine
 >> production
 >> requirements and meeting specifications for a number of non-aviation
 >> related
 >> applications as our top priority.
 >>
 >> Like Mr. Lamar, we do not suggest that one of the first applications
 >> of this
 >> engine be in an aircraft.  We would prefer to establish a performance
 >> history with a less safety-critical application.  But we have little
 >> control
 >> of the engine once it is sold and, realizing this, when we were
 >> approached
 > >> by the group mentioned above, we suggested that they run independent
 >> tests
 >> and do their own evaluation.  Given the outcome is positive and the
 >> "first
 >> articles" coming out of our manufacturing effort are suitable for
 >> their use
 >> in an aircraft, they will proceed.
 >>
 >> Again, we want our rotary engine to gain acceptance in a wide range of
 >> applications and have been working steadily (although slowly) towards
 >> that
 >> goal since we acquired the OMC design in the mid-1980's.  I know that
 >> many
 >> people have become frustrated with our apparent lack of progress, but
 >> we
 >> continued to work on both the 530 and 650 designs at our own expense.
 >>  Our
 >> requirements lead us to look first at the 530, but other industries
 >> needed
 >> the additional horsepower of the 650 (50 hp vs. 75 hp, respectively).
 >>
 >> We have slowly acquired all the specialized equipment needed to
 >> produce the
 >> engine in volume and built tooling for both the 530 and 650 engines,
 >> with
 >> custom tooling for the version required for our ducted fan
 >> application.
 >> Furthermore, we've been testing the engine in various configurations
 >> in our
 >> dyno facility nearly continuously for the past three years
 >> (two-to-three
 >> builds a week), and in a ducted fan test stand for about two years.
 >> The
 >> eight 530 engines in the Skycar have now been in used periodically
 >> for about
 >> 2 years and in a more than 20 brief hover flights over the past year.
 >>
 >> I appreciate that it has taken us a long time to bring the Rotapower
 >> engine
 >> to this point but I hope that we can get an unbiased appraisal of the
 >> engine, regardless of how long it takes.  As rotary engine
 >> supporters, I
 >> continue to think that this could be your goal as well.
 >>
 >> Sincerely,
 >>
 >> Bruce E. Calkins
 >> General Manager
 >> Moller International
 >> (530) 756-5086
 >> www.moller.com

The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.