Paul
     > Have you any suggestions for a rotary PCV system using
     > a turbo? Have not seen it covered in my yr of
     > following your posts. And is there a better term to
     > replace "crankcase" in this acronym?
     > regards, Robert

     To my knowledge nobody has dealt with that. Blow by does not seem to be a large
     if any  problem in AC use. Not like there is windage on the crankshaft.

If I recall correctly, Tracy Crook said something about some oil blowing out of his engine at around 7,000 RPM, and that he was working on correcting it. It seems that he was having the problem
since he started using the 2.85/1 redrive. If he is having a problem, it would be good to know how to alleviate it.

Brian Trubee

Bruce Turrentine cut away part of the breather system on the RX8 engine Tracy
is using. Here is an illustration of what was cut away.

Paul Lamar

 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.