This one truly does it all. combination throttle body, plenum,
alt air valve and ram air valve. it is about six inches in diameter
and with a bit of tweaking I might be able to get it down to
five inches in diameter and still have a 3 inch ram air port and
three inch throttle body.
This is a classic sleeve valve. The inner sleeve rotates and is controlled
by cables and a wheel on the instrument panel. This one wheel controls
the throttle and the alt air selector.
Ram air comes in from the top. Alt air comes in from the side.
The ends are capped of course and this is designed to work with
side ports and four or more runners. Best place for throttles in P-ports
are close to the block. Not applicable to P-ports.
Nothing that can do all these functions will be simpler or lighter in weight
than this. Easy and cheap to make in the bargain.
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.