Harry Batson wrote:
Hi Paul:
I am installing a Mid West Engine (2 Rotor) in a BD5. I removed the reduction drive to save weight and it is not needed, The problem is that the Oil Metering system is mechanically driven from the
reduction drive. My through are to use an electric oil pump. I see that Mazda use an electric pump.
<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" />
The Mid West is about ½ the size, and the Mid West uses blower driven off the shaft with oil added to cool the rotors that run on ball bearings.
Could you inform me how the Mazda pump varies the oil flow? (((Off M P, RPM ect????) Do you know the volume. Thanks for your help Harry
The Midwest is a special case with their oil system I am not familiar with.
The latest Mazda uses several parameters to meter the oil flow but they are very
concerned with smog. HP, RPM ,throttle opening, temperature, etc. etc.
Use of a small constant speed gear motor might work if you can come up with the
right RPM at 12 volts.
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.