Old message.

*****************************************************
Subject:            Re: LEZ mount
      Date:            Thu, 30 Dec 2004 09:49:53 -0800
      From:            Perry Mick <pjmick@mail.viclink.com>
        To:            ACRE <rotaryeng@earthlink.net>
 References: 
           1

Perry Mick wrote:
   

OK, I think I got it. Let me know if you see any problems. I will
replace the upper 1/8 x 1 x 1 aluminum extrusions with square steel
tubing with an endplate welded on and a hole drilled in the center for a
bolt.

Perry
     

Yep. That looks like it. Have your son make a 1/4 scale  balsa model to verify.

Paul Lamar
   

Ops just saw a problem. Can of worms. The model would show this quick.

Here is a simpler fix. Rubber rod ends. Still the one! :)

Paul Lamar

OK, I fixed it. Certainly looks bulletproof.

*********************************************************************
Ops you are right I failed to upload the picture.

Sorry. 

Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.