Check it again Bill that plate is rigid. If it moves laterally at
     the front it will move the same amount laterally at the rear.

     it is a four bar linkage just like a front suspension. In fact Mazda uses something
     similar in the RX8 rear suspension for the shock and spring mounting.

     Paul Lamar

Ok Paul, if the plate is rigid mounted in the front, (no barry mounts),
then fine. Perhaps there is a bar tying the two fronts togeather that
I couldn't see in the rendering I got?
Bill Jepson

I already mentioned the Barry bushings deflect and screw things up.
No connecting bar.
Here is the RX8 version.

Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.