Ben Schneider wrote:

Paul
  Do you, or anyone else for that matter, know if the intake manifold off
of an older style 13b will fit my 4 port Renesis. What I am really
interestd in is Francios's intake manifold, and runners, and then I would
build my own plenum on the cool side of the engine, and put a ram air
intake on the top or out the side of the cowling. I am not that familiar
with the 2nd and 3rd Gen engines so as to know if they are similar. A
manifold and runners with injector ports would simplify my build greatly.

   Thanks for any info you can provide.

   Ben Schneider

     RV7 N713R  Renesis/RD1C/EC2

I am sure it won't fit. If you send me a sketch with dimensions I will design
a transition that Ed Klepies can make a manifold for you. I would do some heavy
duty porting on the four port RX8 engine first. Don't expect too much power
out of this engine.

Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.