Subject: Cost of aluminum end housings
From: ACRE
Date: 1/8/2005, 6:35 PM


Douglas Fir wrote:


 Paul

 I would definitely be interested in side and end aluminum housings in the
 $500 to $1000 range and am sure I could even sell a ton of them here in
 Japan as well. After repeated emails to Racing Beat without response I'm
 very happy to hear that Mistral will sell parts.  Thanks a lot Francois for
 your fine work and great information.

 In the last week I  have come to the conclusion I need a simpler engine
 mount to keep my planes cowl slim and Mistral's front housing design is just
 what I have in mind.

 Doug in Japan


While you are at it Doug buy one of their gear boxes as well as you will
need a constant speed prop.



Paul

I agree I need a constant speed prop.  Isn't an electrically adjusting prop
an option for me?

Doug in Japan


Yes it is but a constant speed is cheaper and better as it is metal (thinner) and not wood.

Paul Lamar

Not all constant speed props are metal, and my understanding is that metal CS props are undesireable in some of the pushers due to weight issues. There are composite hydraulic actuated CS props
(lighter) out there but they prolly cost more than metal.. Still probably cheaper than $10,000 USD for an electric MT.

Dave Staten

 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.