Subject: Fuel vaporization and other lost causes.
From: ACRE
Date: 1/10/2005, 8:15 PM


If you had perfect fuel vaporization and distribution you still would
not get much better than about .45 BSFC due to the fact the engine
is a rotating combustion chamber engine.


I wonder what is the optimum fuel temperature.

I have checked that  in my plane recently  and I found  it was  around
50  C. 
That scared me, and I have spent whole day thermally  insulating  all
the pipes, connectors and providing blast air for the fuel filter. I
left the fuel pump alone since it is attached with a large flange to the
engine block, and I thought that insulating it would not change a thing.
It the flight following the changes I found that all my work was worth
nothing. The fuel temperature did not change at all. I seems to show
that the fuel pump is responsible for that high temperature.

Is the fuel temperature of  50 C  acceptable ? [122 F]

Jerzy

Not if you are returning it to a small fuel sump tank instead of back to a main tank.
You risk vapor lock on an external high pressure fuel pump.

We discussed using a fuel cooler on here a few years ago.
Fill me in on your system. Are you using Tracy's EFI?
 
Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.