Subject: Oil injection in the fuel
From: ACRE
Date: 1/10/2005, 7:51 PM


$10
a quart turbine oil. However Mobile One is not optimized for the
rotary so I have high regard for Idemitsu which is.

Paul Lamar


In gas turbines, coking problems are normally associated with heat
soak back into stationary oil after shut down or really excessive
temps in a slow flowing tube. A car driven short distances gives
plenty of heat soak back after shut down oportunities.

Mobil recently withdrew it's top HTS (High thermal stability) Turbine
oil (MJO 291) from market due to coking and attacking seals. Oil
stability testing is no where near as simple as to put a teaspoon full
in a cat food can and bake it..... or maybe this was just the one
critical test that ExxonMobil missed :)

Mark Wrathall

It is quick and dirty but it separates the men from the boys real well.
Try it you might like it :)

Paul Lamar

Matt Prather wrote:

Do any of the case lubricating oils burn clean - without
deposites?  I'd like a 50wt that didn't make a mess.

Matt-

Don't know Matt. Try testing it.

Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.