Probably the greatest effect on the BSFC is the capacity to lean with
     > altitude so as to keep the EGT's as high as possible all the time.  This
     > occasions two things --- a very robust first foot or so of the exhaust
     > system and careful attention to how you are going to get the additional
     > heat out of the cowl.  Both are do-able.

I 've been thinking about using the Schedule 40 304 stainless for the first foot or so of my exhaust system, but I can't bends that tight -2" inside diameter with 2.35 OD pipe. What I have now is
2"Diameter .049 321 Stainless bends. I'm a little concerned that the bending stretched the material to an unacceptable thinness right where the pipes are the hottest.
Of course I am going to have a SS heat shield completely surrounding my exhaust system, but I was wondering if ceramic coating the pipes would help keep the pipes intact.

Anyone?

Brian Trubee

I think you would be better off welding a conformable patch on the pipe.
 
Ed Anderson 304 SS .140 wall exhaust pipes don't even discolor :)

Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.