Subject: Hidden advantage - Electric drive
From: ACRE
Date: 1/17/2005, 7:58 PM


..  It can supply all the load we need? If so,
and the other
alternator were connected to the e-shaft like
the motorcycles do ( maybe
a generator with the PM on the e-shaft ) ,
we've
have no friction lose from turning the spare
alternator...

This is a much better idea. You can set-up an
alternator  with either a
permanent magnet alternator, like most of the
bikes use. Or a stator and
field altenator with the field not energized
unless needed.
Bill Jepson

Louis Bigelow wrote:

WhooA!
 *I* used to ride those bikes with the perm magnet
alternators.
 DON'T DO IT!!!
 I had 5 failed REGULATORS that ruined 6 alternators.
(I didn't learn the first time, fried two stators in
three weeks..) and one lad I went to college with
had his bike have a full electrical fire. ( he was on
the fwy.) it burned to the ground.
 The regulators shunted un-needed current to a load.
failures were ALWAYS in a SHORTED condition.
wich fried the windings/wiring.
as all with suzuki's GT250 (74) gs-750 (78) and
gv1400gdg (86)
 Stick with what works.
Louis


The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.