Subject: Hidden advantage - Electric drive
From: ACRE
Date: 1/18/2005, 11:21 PM


Paul

Thanks. For those of you who are interested: the tail design was
supposedly
conceived by the engineer watching a the Koi (carp) movements and how it
uses it's body to travel upstream.  The idea was so silly the president
tried it on a smaller machine we make and lo and behold it worked.  I
won't
bore you with the details of the why it works. But it tracks
beautifully.

This unit like our smaller 400 watts units from SW Windpower that we
assemble here are used in  HYBRID systems. Notice a trend in my thinking
here?:)    They combine with photovoltaics to power telecommunication
systems in harsh environments, supplement a wee bit of power for utility
tied 3kw photovoltaics systems, power street night lights, remote
trekking
lodges or boats,  and are used by SONY, RICOH, and quite a few other
companies to power their huge neon signs. Greenwashing:)

This unit's props are carbon fiber over foam core and were designed by
Tokyo
Univ. Aeronautical professor. Blade design is a modified scimitar he
said.
Weight 400 grams each.  Made for us by TORAY plastics. You are right
about
the vortexes but the loses are minor. Actually that gives you a hint at
size
of most 3K units.  These props could power a bigger generator and will
in
the next model.  Sumitomo Metals did the light weight generator. Total
weight without the pole is 14Kgs.

All of designs now motor themselves for about 3 seconds every min in
calm
air.  We found it only consumes a few amp/hours a day to do this but
more
than makes up for it by catching the light breezes that happen with
thermal
activity. Simply put it over comes start-up resistance.  Our own guys
designed the controller which is inside.  A traditional box maker from
the
Hakone (Mt Fuji area) showed the aluminum die cast engineers how to make
the
puzzle joints. Hint the rear section slips in from the side.  Whole
project
start to finish was done with using Solid Works and then imported to a
solid
modeling machine and after final testing the aluminum die cast molds.
World wide beta testing starts in the summer.  Mass production if on
schedule will be late autumn.

Give it a year to be at your local dealer.

Yes either the pancake or radial PM in the RE bell housing will be used
as a
starter/gen. This is one item I will produce and offer it to the group
if
interested. 12 or 24v versions.  Don't know the weight yet but it better
be
under 9Kgs. [19.9 lbs]  Depends on what is attached to it. Ie how to
interface to
Tracy's rubber donut flex plate and how to incorporate a strain gauge
into
its as well.   The radial will be finished in the early summer time.

Doug in Japan

Doug,
There isn't a lot of spare room in there.
George (down under)

The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.