Subject: Hidden advantage - Electric drive
From: ACRE
Date: 1/18/2005, 7:42 PM


The regulators shunted un-needed current to a load.
failures were ALWAYS in a SHORTED condition.
wich fried the windings/wiring.
as all with suzuki's GT250 (74) gs-750 (78) and
gv1400gdg (86)
Stick with what works.
Louis


Louis,
I worked for Kawasaki which used a permanent magnet alternator
900 ZI '73-about '83 with fewer problems than their field and stator
systems. They did NOT short to ground or load, that is old zenier diode
stuff like the brits used in the 50's! The system opened the "Y" winding
to cut power. This was one of the most reliable systems I ever worked
with. The advantage is that the system will generate power any time
the engine is running. The disadvantage is the weight of the system,
most weighed 7-8 pounds which is quite heavy especially for a back-
up system. Lastly, the permanent magnet alternator drew more power
when operating by a small percentage. I am not an EE but it was
explained to me that there was some "field quenching losses" when
the sine wave passed through the windings. I sure there was waste
heat generated there as well. I NEVER saw an electrical fire on any
of these machines.
Bill Jepson



Bill,

Yes you are correct.  Even the last three years there  have been some
amazing breakthroughs in PM generators and even more so in control systems.
Shown below is our companies' latest PM true 3 phase wind gen. rated at 1KW
at 1270 rpms.  Blades are carbon fiber. Tail wags to keep it aligned.
Aluminum body with no bolts.

Playing with it we have let it rev up in strong winds to over its design
limits to  2500 rpm where it started slipping but still put out  3K. Up to
500 rpms it sucks as a generator:)

IMHO for an in the bellhousing, direct connect motor/generator, a large
diameter unit would work best. Pancake motor or magnets around the
circumferance. At this point in time 3Kw is about the best weight, cost
performance, and versatility for this concept. Probably the most efficient
and simple turbocompounding system will still be direct gear.

Doug in Japan

That sure is cool looking Doug. It has very Japanese looking style to it.
Looks like you could make your own props. What are they made out of?
You need a larger spinner. You are getting energy absorbing vortexes
off the roots of the blades.

What do people use a 1 Kw 3 phase wind generator for?

3 Kw (4 HP) pancake motor in the bell housing? What is that for? Starter
generator perhaps? What would it weigh?


Paul Lamar.


Paul

Thanks. For those of you who are interested: the tail design was supposedly
conceived by the engineer watching a the Koi (carp) movements and how it
uses it's body to travel upstream.  The idea was so silly the president
tried it on a smaller machine we make and lo and behold it worked.  I won't
bore you with the details of the why it works. But it tracks beautifully.

This unit like our smaller 400 watts units from SW Windpower that we
assemble here are used in  HYBRID systems. Notice a trend in my thinking
here?:)    They combine with photovoltaics to power telecommunication
systems in harsh environments, supplement a wee bit of power for utility
tied 3kw photovoltaics systems, power street night lights, remote trekking
lodges or boats,  and are used by SONY, RICOH, and quite a few other
companies to power their huge neon signs. Greenwashing:)

This unit's props are carbon fiber over foam core and were designed by Tokyo
Univ. Aeronautical professor. Blade design is a modified scimitar he said.
Weight 400 grams each.  Made for us by TORAY plastics. You are right about
the vortexes but the loses are minor. Actually that gives you a hint at size
of most 3K units.  These props could power a bigger generator and will in
the next model.  Sumitomo Metals did the light weight generator. Total
weight without the pole is 14Kgs.

All of designs now motor themselves for about 3 seconds every min in calm
air.  We found it only consumes a few amp/hours a day to do this but more
than makes up for it by catching the light breezes that happen with thermal
activity. Simply put it over comes start-up resistance.  Our own guys
designed the controller which is inside.  A traditional box maker from the
Hakone (Mt Fuji area) showed the aluminum die cast engineers how to make the
puzzle joints. Hint the rear section slips in from the side.  Whole project
start to finish was done with using Solid Works and then imported to a solid
modeling machine and after final testing the aluminum die cast molds.
World wide beta testing starts in the summer.  Mass production if on
schedule will be late autumn.

Give it a year to be at your local dealer.

Yes either the pancake or radial PM in the RE bell housing will be used as a
starter/gen. This is one item I will produce and offer it to the group if
interested. 12 or 24v versions.  Don't know the weight yet but it better be
under 9Kgs. [19.9 lbs]  Depends on what is attached to it. Ie how to interface to
Tracy's rubber donut flex plate and how to incorporate a strain gauge into
its as well.   The radial will be finished in the early summer time.

Doug in Japan

 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.