Subject: Hidden advantage - Electric drive
From: ACRE
Date: 1/18/2005, 1:58 AM



Stock scam time.

Paul Lamar


Paul,

Perhaps not a stock scam but like Borman turbines with a similar
item

When people put the words "stock quote" and "stock chart" on their web
site for
what appears to be a new invention a red flag runs up in my brain. I
then
start to look at the physics very carefully.

Particularly when they are vague about certain engineering details
such
as the recuperator AKA regenerator. Regenerators are the turbo
compound
of gas turbines.  Regenerators work but they must be designed
right and they are bulky. The M1 Abrams tank uses a  regenerator in
its
gas turbine engine but the BSFC is still nowhere near that of a
diesel.
Chrysler built some cars 30 years ago with gas turbine engines with
regenerators. Those are probably the ancestors of the A1 tank engines.
A big problem with these is the seal between rotating
regenerator and the high pressure air duct. Here is a drawing of such
and engine.

BTW notice the lack of a required intercooler in this turbine engine
adding to the efficiency of the engine but not enough to make it close
to
a diesel.

This has nothing going for it over a wankel rotary gen set let alone
a turbo compound wankel rotary gen set other than the fact it will
burn
diesel fuel. Francois is working on that. Efficiency of this device is
well below 30% not counting using the exhaust heat to heat water or
other
cogeneration functions. Those functions can be implemented with any
ICE.
A turbo compound wankel rotary gen set would be about 40% more
efficient
at generating electricity.

Aircraft APU's do not use regenerators and high RPM alternators.
They gear the turbine shaft down and use conventional alternators.
If these things are as efficient as they say they are they would be
widely
used in aircraft APU's. Perhaps it is the high total weight that
disqualifies them.

Paul Lamar


Capstone's primary success story is in places where fuel is of varied
quality, and nearly free. Such as methane from land fills, sour gas
from refineries, pipeline installations, PR spots, etc
 I think I saw a couple of them at Oshkosh - They look a lot like
big refridgerators. Vance

I can understand why they would be popular for low quality waste gas
fuels.
Apparently gas turbines will run on anything. One does not get
that impression from their web site however.

Do you have any details on the regenerator used Vance?

Paul Lamar

A few items - Intercoolers are almost never used in gas turbine layouts,
And of course are not useable on single stage compressors such as this.
Aparently the recuperator/regenerator is a reverse flow, static heat
exchanger with transfer through the metal walls. A fairly compact
folded configuration probably heavy and limited in area (not a sidewheeler
like Chrysler etal.)
Aircraft APU uses so little fuel compared to the system that SFC
is probably the last priority.
Capstone is probably subsidized because of being politically correct.

Direct drive centrifugal [supercharger]- I suspect that 7000 rpm is still pretty low -
ie low boost - heavy - low efficiency

Yes. I agree with the last assessment but it is simple and reliable.
Perhaps it could be cast or machined in magnesium to keep the weight down.
Maybe even carbon fiber.

Paul Lamar

 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.