Subject: Exhaust ceramic coating

Thick wall ss 304 310 and 321 are manufactured in 45,90 and 180 bends for
the boiler and oil field industries. I bought the pieces for my exhaust
system at a local oil field supply house. as an additional benefit they are
beveled on the ends and cut square. made manufacturing the exhaust a one day
job including driving back and forth between my shop and the hanger.

smale@ncinternet.net

I believe so. I bought the bends at a oilfield supply house. the parts have
a very tight radius and were easy to configure into a convoluted exhaust
system feeding a turbo. the parts appear to be mandrel bent and not pressed
in halves and welded. the markings on the parts were in French so i assume
they were manufactured in France.

smale@ncinternet.net

Mr. Smale,

What is the name and location of the oilfield supply house?
Thanks,
Vaughn Mann

 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.