norm wrote:

Paul:
Do the injectors for the RX8 have different part
numbers than for a RX7 and are injector pressure
similar?
Norm

I am sure the part numbers are different as the injectors look entirely different.
There  are six injectors on the high power RX8 engine. Two different spray patterns.
19 and 30 degrees.

Primary 1 front and rear is 30 degrees.
Primary 2 and secondary front and rear are 19 degrees.

Max pressure on the pump is 56.6 psi. It is a return less
system so pump speed is controlled by the computer I think.

Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.