FYI,
this is from the automobiles.honda.com website.
ENGINEERING: ELECTRIC MOTOR / GENERATOR
INSIGHT
Permanent Magnet Motor Standard
Horsepower @ rpm (SAE net) 14 @ 3000 13 @ 2000
Motor Width (mm) 60
The "fly in the ointment" may be that the IMA appears to be a 144 volt system
!
Keep after that "pancake" starter/generator project !!!
(so much for that idea)
Thanks,
Tom
Tom,
We are thinking alike. These types of motors were the first thing I looked
at also. Besides the high voltage and hp, the weight is a killer. I like
the idea keeping the engine as slim as possible and hence one location for
the starter/alternator is in the bell housing.
The company Marc introduced, with the alternator on the water pump could be
the second location. Made by Barrett Racing I believe. I checked the
website again and found that some units deliver up to 32 amps which might be
fine for a back-up.
BTW thanks Marc. for finding that item. I would be interested in the
alternator only and making an adaptor to fit the RE inhousing water pump.
Doug in Japan
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.