Bulent Aliev wrote:

Here is one for $775:

http://www.atpturbo.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=GRT>>>>
-

TBO-002&Category_Code=GRT

Bulent

Great price for a ball bearing, water cooled, built in waste gate turbo.
What's not to like.

Paul Lamar

How about fitting it? Do they sell ready made adapters?
Bulent

You will probably have to have a adapter plasma cut from 1/2 inch steel plate.
If you have your stock turbo there send me a sketch of the bolt pattern
done in MS Paint. My 91 is up at the hangar. I have an 89 here but the bolt
pattern is different. I'll draw an adapter for you.

Paul Lamar

Mine is mounted on. The other day I run it for a first time with my hand
made (Perry Mick design) prop. Without the turbo connected I could not hold
it with the brakes at 3500 engine RPM. I have to take the turbo down again
to install EGT's and will trace the pattern.
Bulent

 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.