Bulent Aliev wrote:

Here is one for $775:
http://www.atpturbo.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=
GR
T-
TBO-002&Category_Code=GRT

Bulent

Great price for a ball bearing, water cooled, built in waste gate turbo.
What's not to like.

Paul Lamar

How about fitting it? Do they sell ready made adapters?
Bulent

You will probably have to have a adapter plasma cut from 1/2 inch steel
plate.
If you have your stock turbo there send me a sketch of the bolt pattern
done in MS Paint. My 91 is up at the hangar. I have an 89 here but the bolt
pattern is different. I'll draw an adapter for you.

Paul Lamar

Never mind. I found a dwg. Here it is for comparison.
I'll work on a drawing.

Paul Lamar

Thanks Paul. I have a laser cutting place close by.
Bulent

I am amazed the GT28 is a so much smaller flange than the T3. Must be some
major
advances in aerodynamics. We could use the next size up ball bearing unit but
it does not have a built in waste gate. This turbo is probably considerably
lighter

One of the dealers advertises 17 pounds shipping weight. That's light.
Thanks for the drawings
Bulent

 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.