> > > If these were your choices, which would you prefer(yes, I

know these

     > aren't the only choices out
     > > > there, but please bear with me :)
     > > >
     > > > A Peripheral Port 13B turbo'd to make 400HP@5252RPM geared

down 2:1

     > > >
     > > > A Peripheral Port 13B N/A to make 300HP@7000RPM geared down

2.85:1

     > > >
     > > > Thanks!

     > > The 300 HP would be a lot easier to cool.
     > >
     > > Paul Lamar
     > >

     -Daniel Gagnon wrote

300 HP 2.85:1 Which is what I'm going after in the 20B. Only 250

needed!

Bill Jepson

"Barry A. Doublestein" wrote:

I'd take the 300 HP 2.85:1.  This is what I am putting in my Glasair SII
FT.

Barry Doublestein
Atlanta

 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.