> > > If these were your choices, which
     > > > would you prefer(yes, I know these
     >
     > aren't the only choices out
     >
     > > > there, but please bear with me :)
     > > >
     > > > A Peripheral Port 13B turbo'd to
     > > > make 400HP@5252RPM geared down 2:1
     > > >
     > > > A Peripheral Port 13B N/A to make
     > > > 300HP@7000RPM geared down 2.85:1
     > > >
     > > > Thanks!
     > >
     > > The 300 HP would be a lot easier to
     > > cool.
     > >
     > > Paul Lamar

     -Daniel Gagnon wrote

300 HP 2.85:1 Which is what I'm going after
in the 20B. Only 250 needed! Bill Jepson

norm wrote:

A Peripheral Port 13B N/A to make 300HP@7000RPM
geared down 2.85:1.
Norm Farb

Tim, make sure you use two inch intake pipes or you won't see 300 HP at 7500 RPM.

Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.