Subject: C-W RC-60, was Center main bearing
From: ACRE
Date: 2/17/2005, 10:01 AM


     Wow. I had no idea. What was the goal if any?

Curtiss-Wright started working on the rotary engine in 1957, beginning with some paper studies and mathematical analyses. I don't recall the exact timeline, but I think the first Wankel/NSU rotary
engine that operated for more than a few moments was in 1959. So C-W was doing research and development starting almost immediately after the engine was "invented."

The RC-60 series of engines was running at least as early as 1962, maybe even earlier (I could look it up, but it's not really important right now). At the time the RC-60 was first running, there
was no knowledge about the materials or design of anything in the engine. It was all invented and developed on the RC-60 (and of course simultaneously at NSU, Mazda, and Mercedes with somewhat less
intensive activities at many other companies). In those early days there was a tremendous amount of information sharing between the companies, and a lot of what ended up in other companies'
production engines was first developed in the RC-60.

Curtiss-Wright's business objective was to license technology, and not to actually manufacture engines. So the RC-60 and other engines were used to develop all kinds of concepts that could be
patented and licensed to others for all different kinds of applications. This is very different from the approach at Mazda, where their development efforts have focused on a much narrower
application range (automobile engines, and then narrowed to sports car engines). All of Mazda's production engines have shared the same basic geometry (R and e), and the various displacements based
on different rotor widths (10A, 12A, and 13B) have now distilled into only one active displacement series. Curtiss-Wright, on the other hand, was much more active in trying countless different
concepts -- geometry changes, material changes, combustion system changes, air cooling, etc. but they did not have the need to develop anything all the way to the point of being ready for
production. They only needed to have things to the point of proof of concept, and their licensees would be responsible for tailoring the technology to the application and making it durable,
reliable, manufacturable, economically feasible, etc. Since the RC-60 was the development mule, there were many different configurations; some differences were big, some were subtle, but it is
quite possible that no two engines were ever truly identical in the same way that production engines are identical with a fixed bill of materials and interchangeable parts.

Jon

 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.