Subject: DOE Announces Energy Efficiency Projects
From: ACRE
Date: 2/17/2005, 7:20 PM

Keith Moore wrote:

      Paul:

      You may find DOE's announcement of interest - particularly the list of
EXHAUST ENERGY RECOVERY projects

      - sounds just like what you've been saying!

      Regards,

      Keith Moore
      LEZ

      Secretary of Energy Bodman Announces Energy Efficiency Project
Selections

--------------------------------------------------------------------------

      (The Associated Press) - Feb 16

        Secretary of Energy Samuel Bodman today announced the selection of
projects that will increase the energy efficiency of passenger and
commercial vehicles while maintaining low emissions. Twelve projects, with a
total value of $175 million (50 percent, or $87.5 million contributed by the
private sector) will focus on development of advanced combustion engine and
waste heat recovery technologies.

        "Together with our private sector partners, the Department of Energy
is pursuing innovative new technologies to improve vehicle fuel efficiency
and reduce vehicle emissions. Partnerships like these are a critical
component of our strategy to protect the environment and reduce our nation's
dependence on foreign sources of oil, two priorities of President Bush,"
Secretary Bodman said.

        The projects selected support the Bush Administration's goal of
improving efficiency of internal combustion engines from 30 percent (2004
baseline) to 45 percent by 2012 for passenger vehicles and from 40 percent
(2002 baseline) to 55 percent by 2013 for commercial vehicles, while meeting
cost, durability, and emissions constraints. Vehicles utilizing these
technologies would use 10 to 15 percent less fuel than current vehicles,
reducing America's dependence on foreign sources of oil and improving the
environment through reduced emissions.

        Seven of the twelve projects will conduct research in advanced
combustion technology. These projects have shown potential to achieve
efficiency goals for cars and trucks while maintaining cost and high
durability with near-zero emissions. The remaining five projects will
develop technologies to convert waste heat from engines to electrical or
mechanical energy; improving overall thermal efficiency and emissions
reductions.

        "These two sets of projects complement each other," Assistant
Secretary for Energy Efficiency and Renewable Energy (EERE) David Garman
said. "By moving both development strategies forward, we can look toward a
future with better, more efficient engines that produce less waste heat and
fewer emissions. We at the Department of Energy are proud to help bring
these projects to fruition."

        The projects were selected from a solicitation by EERE's Office of
FreedomCAR and Vehicle Technologies to develop enabling technologies,
components, methods and fuels for "high-efficiency clean combustion," as
well as utilization of engine waste heat for useful work.

        In 2001, the United States used over 10 million barrels of crude oil
per day for passenger and commercial vehicles. Over half of that oil is
imported from foreign countries. Current projections show imports will
fulfill about 70 percent of domestic needs by the year 2025. Increasing the
energy efficiency of our nation's passenger and commercial vehicles is an
effective way to reduce dependence on imported oil while also reducing
environmental emissions.


        EXHAUST ENERGY RECOVERY

        Caterpillar Inc. in Peoria, IL will develop a new air management and
exhaust energy recovery system for commercial diesel engines. Electric
turbocompounding and high efficiency air system technology will be key
technology building blocks developed. Additional system elements may be
developed to support the energy recovery system. Advanced engine system
concepts that further enable exhaust energy recovery may also be
investigated. DOE cost: $3,934,862. Industry cost share: $3,934,862.

        Cummins Inc. in Columbus, IN will develop a waste heat recovery
system to support clean and efficient combustion and reduce heat rejection.
This will include limited design and development of components, subsystems
and associated electronic controls with integration into a commercial
vehicle. Team members include International, Indiana University-Purdue
University, University of Illinois-Urbana Champagne, Oak Ridge National
Laboratory, Pacific Northwest National Laboratory and the National Institute
of Science and Technology (NIST). DOE cost: $5,545,165. Industry cost share:
$5,545,165.

        Detroit Diesel Corporation in Detroit, MI will evaluate engine-based
technologies to partially recover and convert exhaust energy into useful
mechanical and electrical work. The focus will be on the integration of
technologies to achieve synergistic effects of the evaluated technologies. A
down-select of promising technologies is planned. Testing would be performed
in a commercial diesel engine. Team members include Freightliner, Schneider
and Holset Turbochargers. DOE cost: $7,625,000. Industry cost share:
$7,625,000.

        John Deere Product Engineering Center in Waterloo, IA will develop
turbo compounding in heavy-duty applications including both agricultural
tractors and on-highway trucks. Optimization of system architecture will be
a focus of the study with evaluations of factors impacting both system
performance and packaging. Testing will be performed to determine real-world
benefit. Team members include Eaton, EMP and Ricardo Technologies. DOE cost:
$4,803,119. Industry cost share: $4,803,119.

        Mack Trucks, Inc. in Hagerstown, MD will integrate a turbocharger
and compounded turbine into an overall system that would include a
continuously variable transmission (CVT) to optimize performance. The
complete engine / CVT will be demonstrated in commercial diesel vehicles.
Team members include Volvo and Silvatech Industries. DOE cost: $1,700,466.
Industry cost share: $1,700,466.


The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.