Subject: alum pulley
From: ACRE
Date: 2/18/2005, 8:25 AM


Ed Klepeis wrote:

Dear Paul
    A major after market alum pulley mfg. says in there catalog claim that
you will get 2.7 hp gain for every pound you lose from the crank pulley what
is your take on this claim. I know on the
subaru eng we can lose approx 5lbs on the crank pulley by going to an alum
pulley. I have a pulley already for the 2.5L subaru but I'm thinking about
having an alum undersize  4 or 5 grove pulley
made up for the rotary if there is enough call for it.

Regards

Ed Klepeis

techwelding@comcast.net


Perhaps if you take into consideration the rotational inertia
and you measure the HP in terms of engine acceleration. In an aircraft
engine that runs at constant RPM it is not applicable.

Paul Lamar

Shawn Baumgartner wrote:

Finally someone who understands what light weight pulleys will do! I guess
it takes aviation people to figure it out. God bless aviation junkies! I'm
one too but I have not taken the step to fly by my own hands yet.

Thanks,
Shawn Baumgartner
President & Sales Director
Unorthodox Racing Inc.
Phone: 631-586-9525 x.16
Fax: 631-586-2599
www.unorthodoxracing.com

The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.