Subject: DOE Announces Energy Efficiency Projects
From: ACRE
Date: 2/19/2005, 2:15 AM


I agree with you on raising the efficiency of the otto cycle with out
some sort of energy recovery from the exhaust to 45%. If it was that
easy it would have been done years ago. Ceramic engines were tried
years ago.

Since I have about 1500 subscribers I would hardly say everybody is
telling
me it won't work.

In my extensive research on the subject I can find no references to any
organization that has tried a small turbine optimized for road load HP.
Do you have any such references? I can look up just about anything at
the UCLA technical library.

The new Ford 500 with a 200 HP engine is using a CVT plus torque
converter.
Unfortunately I don't have any numbers as to RPM verses cruising speed
yet.
Running the engine at a lower RPM for a given cruising speed yields a
larger
throttle opening and a higher manifold pressure reducing the pumping
losses
like you say. The industry term for this is called down speeding. A
process
that has been on going for the last 30 years with four speed overdrive
automatics
and six speed manual transmissions in conjunction with lower axle ratios.
My
1994 V8 Cougar cruises at 80 MPH at about 2000 RPM with its four speed
overdrive
automatic TX. IMHO it is largely responsible for the improvement in car
MPG over
the last 30 years. Lower RPM, same displacement, higher volumetric
efficiency,
same mass flow. Engine friction loss is less however due to the lower RPM.

If all it takes to improve the quality of the exhaust is a larger throttle
opening for a given car speed that can be arranged. However IMHO
intuitively
it won't make much difference as the HP is directly proportional to the
mass flow.

This chart from NACA Report No. 786 shows little or no reduction in engine
HP (back pressure) as a result of the turbine while at sea level (15 psi
absolute) the
turbine is generating 17.6% of max engine HP of about 510 HP. Obviously
pressure (back pressure) is not an issue and the vast majority the energy to
drive the turbine is kinetic. The nozzle is a fixed
size so the heat added to the mass flow expands
the exhaust gas increasing its velocity entering the turbine. Kinetic
energy is m x V^2.
My reasoning is we make the nozzle such a size as to  extract the max HP
from the
exhaust while the engine is generating only 40 HP without increasing the
back
pressure significantly.

Paul Lamar

With all due respect Paul- I think your time and money would be better spent
getting your dyno on line.
When starting a new development program, the first step is checking your
wallet. Do not engage in
vast development programs with half-vast funding.. The turbocompounding
thread has little chance
of improving aircraft useage of the Wankel. but some real measured
performance data would go
a long way. - Vance

I have no intentions of doing any R&D on the automotive aspects 
of turbo compounding. I will leave that to the car companies.
Measuring the exhaust temp on the RX8 at road load would be great 
but little would be learned measuring the back pressure because of
the catalyst.

I have no doubt whatsoever that an aircraft rotary engine turbo compound 
will work just great. I think Monty agrees with me on that. 

I just read that a radial inflow turbine is not well matched to an 
internal combustion engine because of the back pressure it generates. 
All the NACA data points towards an axial flow turbine with little 
or no back pressure.

As far as my dyno is concerned I am sorry it is taking so long but
certain family matters have come up that need to be addressed first.
That includes some traveling. This newsletter kind of fits into what 
little spare time I have left after that. When I do get it working
one of the things that would be fun to do is disconnect the compressor
and measure the HP from the turbine at different main engine HP levels.
Doug will probably beat me to that.

Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.