Subject: DOE Announces Energy Efficiency Projects
From: ACRE
Date: 2/19/2005, 5:18 PM


I have no intentions of doing any R&D on the automotive aspects
of turbo compounding. I will leave that to the car companies.
Measuring the exhaust temp on the RX8 at road load would be great
but little would be learned measuring the back pressure because of
the catalyst.

I have no doubt whatsoever that an aircraft rotary engine turbo compound
will work just great. I think Monty agrees with me on that.


Yes I do. I do however think a variable pitch prop and a dyno would be more
useful and have a higher probability of success with less investment. We
already have turbo's, go to high altitude, use the prop to control the
engine and generate large power with the turbo, you will go fast and far.

I just read that a radial inflow turbine is not well matched to an
internal combustion engine because of the back pressure it generates.
All the NACA data points towards an axial flow turbine with little
or no back pressure.


There is no difference operationally at the design point of a turbine,
radial, axial, reaction or impulse in back pressure. They only differ in how
the pressure is utilized in the device and the specific speeds and stage
loadings at which they work best. They can differ in efficiency for a given
task.

If there is no pressure, there is no way to produce kinetic energy to
operate the turbine, and there is no expansion to accomplish. Turbines do
not convert temperature to power. If you don't believe me try heating
uncompressed air to run a turbine.

Monty

A bullet moving through a vacuum has no pressure until it impacts
something. Yet it still has kinetic energy. M x V^2 An internal combustion engine
is similar to a gun.  An exhaust port opening into an exhaust pipe, which 
initially is at atmospheric pressure, imparts kinetic energy to the exhaust 
gas molecules and all the molecules in the exhaust pipe. This results in 
a sensible increase in pressure in that that part of the exhaust pipe due 
to the static inertia of the molecules. At the other end of the exhaust pipe, which 
is open to the atmosphere, the pressure is the same as the atmosphere. Yet 
the exhaust gas molecules now have kinetic energy minus the heat lost through 
conduction to the exhaust pipe itself. They are now capable of imparting 
that energy to a turbine by impacting the blades. The question remains
how big of a turbine?
 
Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.