Subject: Private Re: parts
From: ACRE
Date: 3/2/2005, 11:44 AM


I am working on the supplier for a low cost peripheral  port
modification and
slide throttle but at least ten at a time will be needed to be ordered.
The same guy
did Jerry Hey's Schertz beams. We are still looking for a distributor.

Paul Lamar


Paul what would be required for a distributor?  I'm interested but
don't know what I would need to do. Tom Webber

You have to be willing to buy ten of anything and deal with shipping and
individuals. My plate is too full for that and my friends that own the shop
are not interested in retail operations. For example you gather
together ten rotor housings or have them dropped shipped directly to us.
When we get ten we will put them in the NC mill and cut them for the ports
and ship them back to you. I think the cost of this per rotor housing will be
well under $100. Since a new Mazda Speed P-port housing is $1800 this is
a real bargain.


We will give you a price for ten and you can price then as you see fit.

You will also get exclusive rights as long as you perform. I will let people 
know where to get things from you on a regular basis.

This is my no means the final agreement but it is a good start.

Paul.