Paul wrote:
Hi, Paul...It has been suggested that even though an Ellison TB will
provide enough airflow for a Lycoming 0320 or an 0360, that it would
be insufficient for a rotary. Have you ever seen or heard of a
rotary engine equipped with an Ellison TB that has been run in
anything? (auto, plane, airboat, dunebuggy, etc?). Thanks in
advance for your reply. Paul Conner
Not that I know of. What is the matter with an IO 360 regular aircraft
carb?
Paul Lamar
Correction: O 360 regular aircraft carb.
Paul Lamar
Matt Prather wrote:
The Ellison doesn't have a float bowl - works in any attitude. I
think it has less of a throat restriction/venturi, so you should be
able to get higher manifold pressure, and it will be slightly less
susceptible to induction icing - from the adiabatic cooling side.
Fuel evaporation can still cause icing.
The down side is that it doesn't have an accelerator pump so
you have to run a primer, and idle throttle response can be kind
of notchy. Wouldn't work very well in a car application where
you need lots of torque at idle.
Regards,
Matt-
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.